In short
Source: Sales Surge price list for outbound funnelsAs of: 16 November 2026
In this article
- What is outbound sales automation?
- Which outbound sales software do you need?
- What does an outbound cadence look like?
- Deliverability: how do you stay out of spam?
- How many domains and mailboxes do you need?
- Which results are realistic?
- How do you run outbound in Pipedrive?
- How long does it take to go from zero to the first meetings?
- What does an outbound system cost?
- GDPR and Dutch rules for cold outreach
- Outsource outbound or run it yourself?
- Frequently asked questions

What is outbound sales automation?
Outbound sales automation takes the manual work out of finding, contacting and following up prospects. A small team can talk to many more buyers without writing many more messages, because the list, the sending and the follow-up run as one system.
It is not one tool. It is a stack in layers. The data layer builds and enriches the target list. The sending layer runs sequences over email and LinkedIn. The orchestration layer writes everything back to the CRM and decides the next step. The CRM holds the conversation once a prospect replies.
Set up well, an outbound sales funnel gives you a weekly flow of conversations instead of one peak after a campaign. Set up badly, it sends the mail everyone complains about and gets your domain blocked. The difference is the setup and the discipline after it. The tool you bought matters far less. How to grow that flow without hiring more reps is on scale outbound sales.
Where it does not fit: an offer that is not sharp yet. If you do not know exactly who your customer is, outbound only spreads the confusion faster. A few weeks of calling yourself is cheaper and teaches you more.
Which outbound sales software do you need?
You need one tool per layer, not one tool per idea. The table below shows the outbound sales tools per layer: what we use, the common alternatives and when you can skip a layer. We are partners of Apollo, Instantly, Make, CloudTalk and Dux-Soup, so we are not neutral here. The alternatives are good tools too.
| Layer | What we use | Alternatives | How you pay | When you can skip it |
|---|---|---|---|---|
| Data and enrichment | Apollo | Lusha, Clay, Cognism | Per user plus credits | Never. Without a clean list nothing else works. |
| Email sending | Instantly | Lemlist, Smartlead | Per sending volume or contacts | When you only do LinkedIn and calling. |
| Dux-Soup | Heyreach, Expandi | Per user or per sender account | When your buyers are not active on LinkedIn. | |
| Orchestration | Make | Zapier, n8n | Per operations per month | When the sending tool's native CRM sync covers everything. |
| CRM | Pipedrive | HubSpot, Zoho | Per seat per month | Never. Replies need a home. |
| Telephony | CloudTalk | Aircall, JustCall | Per user per month | When nobody calls a warm reply. That is a mistake. |
Three rules when you choose. Pick tools that connect cleanly to your CRM, because a reply that does not reach the deal is a lost reply. Pick one sending tool and learn it well, instead of spreading mailboxes over three. And keep the accounts in your own name, so you can switch partners without losing your domains or your data.
How we connect the sending tools to Pipedrive is in the guides on Instantly and Pipedrive and Apollo and Pipedrive. For enrichment from many sources, see Clay and Pipedrive.
What does an outbound cadence look like?
A good B2B cadence runs over about three weeks, uses two or three channels and gives every touch its own reason. Below is the cadence we start from. We adapt it per market, but the shape stays the same: a short first email, a visible LinkedIn touch, a call while the prospect still recognises your name, and a clear last message.
| Day | Channel | Step | Goal |
|---|---|---|---|
| 1 | View the profile | Your name appears once before the first email | |
| 1 | First email, four to six sentences | One relevant trigger, one question | |
| 3 | Connection request without a pitch | A second, softer channel | |
| 5 | Follow-up in the same thread | A new angle: a short example or insight | |
| 8 | Phone | Second channel: a call | A real conversation while your name is still fresh |
| 11 | Message if connected | Short, personal, no attachment | |
| 14 | Value email | Something useful without asking for a meeting | |
| 18 | Phone | Second call attempt | Book the meeting or learn the timing |
| 21 | Closing email | Ask whether to stop or check back later |
Stop the sequence the moment someone replies, books a meeting or turns out to be an open deal in your CRM. Nothing burns trust faster than an automated follow-up after a person already answered.
The difference between a good and a bad first email is mostly length and relevance. A bad one looks like this: "Hi [name], I hope this email finds you well. We are a leading agency that helps companies like yours grow revenue with innovative solutions. Do you have 30 minutes next week for a call?" It is about the sender, it could go to anyone, and it asks for a lot.
A better one: "Hi [name], saw you are hiring two account managers in Rotterdam. Teams that grow sales headcount usually feel it first in follow-up: leads that sit in someone's inbox. Is that a topic for you right now, or not yet?" One trigger, one problem the reader recognises, one easy question. No link, no attachment, no calendar request in the first email.
Deliverability: how do you stay out of spam?
Outbound email automation only works when the mail arrives. You stay out of spam with correct authentication, separate sending domains, a slow warm-up, low daily volumes per mailbox and a clean list. Skip one of these and the rest does not save you. This is the checklist we use in every build.
- SPF, DKIM and DMARC on every sending domain. SPF says which servers may send for your domain. DKIM signs every message. DMARC tells receivers what to do when a check fails. Start DMARC at p=none, read the reports, then tighten it.
- Separate sending domains. Never send cold email from your main domain. Use look-alike domains that redirect to your website, so a reputation problem never reaches your invoices and your support mail.
- Warm-up before volume. New mailboxes need a few weeks of gradual, real-looking traffic before they send cold email. Rushing this is the most common reason campaigns die in week two.
- Low volume per mailbox. Most deliverability guidance keeps cold email to roughly 30 to 50 messages per mailbox per day. Need more volume? Add mailboxes and domains, do not push one mailbox harder.
- The Google and Yahoo bulk sender rules. Since 2024 both require authentication, an easy unsubscribe and a low spam complaint rate, which Google sets at below 0.3 percent. Bulk marketing mail must offer one-click unsubscribe. Treat these rules as the floor, also when you send less.
- Verified lists and a bounce limit. Verify every address before it enters a sequence. Pause a campaign when hard bounces pass about 2 percent, and find out why before you resume.
- Plain text, few links. No images, no tracking-heavy links and no attachments in the first touches. Open tracking adds a pixel that some filters dislike, so many teams switch it off.
Watch the numbers every day during the first weeks: bounces, spam complaints and the placement test results in your sending tool. Deliverability is not a setting you configure once. It is a habit.
How many domains and mailboxes do you need?
Work backwards from your daily volume. Divide the number of new contacts you want to reach per working day by what one mailbox can safely send, then spread those mailboxes over a few domains. Many teams keep two or three mailboxes per domain, so one problem never takes the whole system down.
A worked example: you want to reach 100 new contacts per working day. Each contact receives the four emails from the cadence above, on days 1, 5, 14 and 21. Once the sequence is running, every working day brings first emails for the new contacts plus follow-ups for the earlier ones, so about 400 emails a day. At about 30 emails per mailbox per day you need 13 to 14 mailboxes, spread over five to seven domains. Add one or two spare domains that warm up in the background, so you can rotate when a domain gets tired.
Start smaller than you think. It is easier to add mailboxes than to repair a burnt domain.
Which results are realistic?
We do not publish a reply rate that you should expect, because it depends more on your list and your offer than on the tools. A narrow list with a sharp trigger behaves completely differently from a broad list with a generic message. What we do is measure four numbers from week one, and judge the campaign on them.
Delivered.
Sent minus bounces. If this is low, fix the list and the domains before anything else.Replies.
All replies, including the negative ones. This tells you whether the message lands at all.Positive replies.
Replies that show interest or ask for more. This is the number that tells you whether the offer works.Meetings and pipeline.
Booked meetings that took place, and the deal value they created in the CRM. This is the number leadership cares about.
Then do the funnel math with your own numbers. A worked example, with made-up rates to show the calculation: 1,000 contacts, 3 percent positive replies gives 30 interested people, half of them book a meeting, so 15 meetings. With your own win rate and deal size you can now say what a thousand contacts are worth to you, and how many you need per month.
If positive replies stay very low after two or three iterations of the message, the problem is usually the offer or the list. More volume will not fix it.
How do you run outbound in Pipedrive?
Pipedrive works well as an outbound sales CRM, as long as you give outbound its own place, so it does not pollute your inbound and your forecast. In practice that means a few deliberate choices.
- Leads first, deals later. A positive reply becomes a lead in the Leads Inbox. Only a booked meeting becomes a deal, in a pipeline that starts with Meeting booked.
- Source fields that survive. Store the campaign, the sequence and the channel on the lead and the deal. Without them you cannot tell later which message created pipeline.
- One suppression list. Everyone who unsubscribes, every open deal and every customer goes on one list that the sending tools check before they send.
- Activities for the calls. Calls in the cadence become activities with a due date, so they show up in the rep's day instead of a spreadsheet.
- One dashboard. Meetings booked, meetings held and pipeline created per campaign, side by side.
How the reply sync and the suppression list work in practice is in the Instantly and Pipedrive guide. How the pipeline itself is designed is in the guide on setting up Pipedrive for B2B.
How long does it take to go from zero to the first meetings?
We do not name a number of weeks up front. Warming up new domains takes a few weeks and usually sets the start date, and warm-up cannot be rushed. The lead time per phase is in the proposal. Someone who promises meetings in week one is reusing burnt domains or skipping the warm-up. Both cost more later than they save now.
Step 1
ICP and offer
Step 2
Domain warm-up
Step 3
Sequences and a dry run
Step 4
Soft launch
Step 5
Steady state
What does an outbound system cost?
The build is the main cost. Domains need warming, sequences need writing and Pipedrive has to receive everything cleanly. Tools are paid separately, directly to the vendors, and their cost grows with your volume and the number of mailboxes.
Full outbound funnel
from €9,500
Audit
€2,200
Need a smaller setup, such as one ICP and one sequence? We price that in the quote after the first call. Want us to keep it running after the build? That is a retainer, with the scope and the price set in the proposal. All prices exclude VAT and are on the outbound funnel page. Below a few thousand contacts per month this is rarely the cheapest route to new leads. A sharp list and calling yourself usually brings in more.
GDPR and Dutch rules for cold outreach
Two sets of rules apply to cold email in the Netherlands, and they ask different things. We are not lawyers. Read this as orientation and have your own lawyer check your setup before you send at volume.
The GDPR covers the personal data you use: names, email addresses, job titles. For B2B outreach you usually rely on legitimate interest. That means you write down why the contact is relevant for this person in this role, you collect no more data than needed, and you tell people where you got their data and how to object.
The Dutch Telecommunications Act, article 11.7, covers the email itself. For email to a natural person you need prior consent. The Dutch regulator treats sole traders, freelancers and partnerships such as a vof as natural persons, so cold email to them needs consent too. Email to a legal entity, such as a bv or nv, is allowed without consent, as long as you identify yourself and offer an easy way to unsubscribe. There is also an exception for existing customers and similar products of your own.
Enforcement is split. The Dutch Data Protection Authority oversees the GDPR, and the ACM enforces the email rules and can fine senders. Belgium and Germany have their own rules, and Germany is stricter than the Netherlands, so check per country.
- Send only to business addresses of legal entities, no Gmail or Hotmail, and filter out sole traders.
- Record your legitimate interest per campaign.
- Offer an unsubscribe in every email and honour it across every tool within a day.
- Keep one suppression list that every sending tool checks.
- Never load scraped consumer data.
Outsource outbound or run it yourself?
Run it yourself when someone in the team has a few hours every week to watch deliverability, adjust messages and work the replies. The tools are not difficult. The discipline is. Without an owner an outbound system usually goes quiet within a couple of months.
Outsource the build when you lack the time or experience to set up domains, sequences and the CRM sync without trial and error. Many of our clients do exactly that: we build it, document every sequence, Make scenario and Pipedrive workflow, train the team and hand it over. Others keep us on a retainer for the running.
Whatever you choose, keep the conversations in your own team. A prospect who replies wants to talk to someone who knows your product, not to an agency.
Frequently asked questions
What does it cost to build an outbound sales system?
A full outbound funnel starts from €9,500 with us, with SDR workflows, the Pipedrive integration, lead scoring and routing. A smaller setup is priced in the quote after the first call. Tools are paid separately to the vendors and grow with your volume. Running it for you after the build is a retainer, priced in the quote. All prices exclude VAT.
How long does it take before outbound books meetings?
We do not name a number of weeks up front, because it depends on your domains, your list and your market. Warming up new sending domains takes a few weeks and usually sets the start date. The first weeks also go to the ICP, the offer and the pipeline in Pipedrive. Sending starts at a low volume and goes up once bounces and complaints stay low. The lead time per phase is in the proposal.
How many domains do I need for cold email?
Work back from your daily volume. Most deliverability guidance keeps cold email to roughly 30 to 50 messages per mailbox per day, and many teams use two or three mailboxes per domain. Reaching around 100 new contacts per working day with the four-email cadence on this page means about 400 emails a day, so 13 to 14 mailboxes over five to seven domains, plus one or two spare domains warming up. Never send cold email from your main domain.
Does cold email still work in 2026?
Yes, when the list is narrow and the message is relevant. What stopped working is high volume with generic copy: Google and Yahoo filter much harder since their bulk sender rules, and buyers ignore anything that could have gone to anyone. Short emails with one real trigger, sent from warmed domains to a verified list and combined with LinkedIn and a call, still start conversations every week.
Is cold outbound allowed in the Netherlands?
To legal entities such as a bv, yes, as long as you identify yourself and offer an easy unsubscribe. To natural persons, which in the Netherlands includes sole traders, freelancers and partnerships such as a vof, article 11.7 of the Telecommunications Act requires prior consent. Under the GDPR you also record your legitimate interest. We are not lawyers, so have your own lawyer check your setup before you send at volume.
Is LinkedIn automation allowed?
LinkedIn's user agreement does not allow third party software that automates activity on the platform, so every automation tool carries a risk for the account it runs on. Many B2B teams accept that risk and keep it small: low daily limits, human looking pacing, personal messages and no mass messaging. If the account is important to you, keep LinkedIn semi-manual and let the tool prepare rather than send.
Which outbound tool stack do you recommend?
Apollo for data, Instantly for sending, Dux-Soup or Heyreach for LinkedIn, Make for the logic in between, Pipedrive as the CRM and CloudTalk for calls. We are partners of most of these, so we are not neutral. Lemlist, Smartlead, Lusha and Clay are solid alternatives. Already running something that works? Then we keep it and connect it properly instead of replacing it.
Can we run outbound in-house instead of outsourcing it?
Yes. We often hand the system over to the internal team after the build. We document every sequence, every Make scenario and every Pipedrive workflow, and train the team on the daily routine. What you do need is someone with a few hours every week to watch deliverability, adjust the messages and work the replies. Without that owner the system usually goes quiet within a couple of months.
